R30/50 v1 to v2 differences
|
R30/50 v1 to v2 differences |
| If you have a R30v2 or R50v2, here are some part
numbers you need to be aware of. These parts for the v2
have the same part number as the v1 equivalent. TT has
improved the new part and since it will still fit the v1
they have kept the same part number. The only problem is
that if you order one of these parts from a store, you
may get the old part because the numbers are the same.
Eventually all the old parts will be sold but until then
you will have to specify you want the new version. The
new tail shafts have been around for a while, the main
thing to look for are the tail fins and pitch arm. PV0005 elevator A-arms - more plastic around link hole PV0012 pitch arm - stronger design like the R60 version PV0013 elevator arm - has cross bracing on top and bottom PV0030 tail shaft - uses a solid pin secured with a set screw PV0038 Tail fins - vert fin longer and has ridge to strengthen it You may notice the R50v2 tail boom has a new part number. This does not mean that it is different, what they did was split up the package. Before you would get the boom, guides, and rod together, now they can be bought seperately. I do like that we can now buy the guides now! PV0393 tail boom PV0392 tail control rod set PV0279 tail rod guides |
| What is needed to convert to a v1 raptor to the v2
head: 1 PV0353 - Main rotor grip 1 PV0354 - Main rotor hub 1 PV0355 - Spindle 1 PV0365 - Thrust bearing (2) 1 PV0372 - Thrust collar (2) 2 PV0374 - Feathering bearing (2) 1 PV0381 - 70 D flap damper |
| Product sheets showing points of improvement: http://www.raptortechnique.com/images/r30v2/index.html |