Raptor #1 Radio Configuration
should only be used as a reference for any
other Raptor.
Raptor 50 conversion kit --------- TT3807
Engine --------------------------------- TT 50
Muffler -------------------------------- Gr8Lakes Custom 46
Fuel ------------------------------------ Wildcat 15% Helimix All synthetic 18% oil
Main Blades ------------------------- stock wood blades 600mm
Tail Blades --------------------------- stock tail blade
Radio -------------------------- Airtronics RD6000
Receiver ---------------------- Airtronics 92777Z
Battery ------------------------ 4.8V 1700mah 'A' cells
Elevator/Aileron Servos -- Hitec 545 (gooped wires)
Collective servo -------------Hitec 545 (gooped wires)
Throttle servo --------------- Hitec 525 (gooped wires)
Tail rotor servo ------------- Aitronics 94357
Gyro --------------------------- Telebee GR701
Remote glow plug extender ----- TTR3803
Glow plug ---------------------------- OS #8
Battery monitor/Glitch counter-- Gem2000
MA carbon tailboom support rods MA #0585-5
T&T Engineering 2oz header tank
Metal collective pitch arm from Ron Lund (Rick's R/C)
Metal washout base from Geoffrey Woodward
QuickUK RC-05 metal swashplate
Wild Chartreuse (bright yellow) SEM 3278
Bright Teal Acme # pb-45877Y manufacture code WA9830 25
here is mine (using Power Master 15% nitro, 20% all synthetic
oil, and with a Gr8Lakes Custom 46 muffler):
main needle: 2 1/4 turns open
low speed needle: 4 1/2 turn out with throttle closed
Flight mode 1 ----------- -9, 0, +9
Throttle hold ------------ -9, 0, +12
Short links on head (left&right) - 29mm
Elevator link (back) - 65mm
Elevator link (front) - 83mm
Aileron links to swashplate (left&right) - 54mm
Aileron to servo (left) - 70mm
Aileron to servo (right) - 69mm
Aileron servo arm (center to ball) - 11.5mm
Collective link - 56mm
Collective servo arm (center to ball) - 11.5mm
Throttle link - 73mm
Throttle servo arm (center to ball) - 9mm