Tools
|
Tools |
Here's what I made to tighten the engine prop nut
<tool>. |
| Common tools used during construction and maintenance. Metric Allen wrenchs - 1.5, 2, 2.5 and 3mm tip sizes. Philips screwdriver - #1 and #2 (actually the screws on this helicopter are JIS - Japanese Industrial Standard) If you can get the JIS screw drivers that works better but are not required. 10mm socket wrench for 30/50 engine fan nuts 8mm socket wrench for glow plugs wire cutters blue loctite CA glue ball link pliers - try to get the ones with the bent nose that are thin. The thick nose type ones are difficult get in behind some of the links. snap ring pliers |